WASHERS / MX-6
MX-6 tunnel egg washer
Washes dirty eggs, capacity 39 000 eggs/hour
MX-6 tunnel egg washer
Washes dirty eggs, capacity 39 000 eggs/hour
 |
DESTINATION: Egg breaking facilities, bakeries, confectioneries, pasta making companies. |
 |
CAPACITY: 39000 eggs/hour |
 |
REPLACES: 85 people |
 |
COMPATIBILITY: 3xVEL-30, UDTJ-500, RX-6, UX-6 |
 |
POWER SUPPLY: 40-50 kW 400 V 3/N/PE 50/60 Hz, 40-50 kW 230 V 3/N/PE 50/60 Hz |
 |
COMPRESSED AIR: n/d |
 |
WATER: from client’s installation |
 |
DIMENSIONS: 5396x1758x1654 mm [212x69x65 in.] |
 |
MINIMAL WORKSPACE: 8000×3600 mm [315×142 in.] |
 |
WEIGHT: 1300 kg [2866 lbs] |
 |
OPERATED BY: 5 persons |
  |
|
 |
ADDITIONAL INFORMATION |
| During first start the washer uses 80 liters [21 gallons] of water. During operation in water saving mode the machine uses 90 liters [24 gallons] of water per 8 hours. Around 150-200 grams [0.33-0.44 lbs] of detergent should be put in the machine after filling with water and after every water change. The machine must operate in a room with mechanical ventilation. Operating temperature: 10-55 degrees Celsius [50-131 degrees Fahrenheit]. The use of a closed water circuit allows for optimal water economy and minimizes costs. All parts of our machines which come in contact with eggs are made out of stainless steel EN 1.4301 (AISI 304). | |
 |
DOWNLOADS |
 DATASHEET |
DESCRIPTION
The MX-6 washes the eggs in a 3D fashion thanks to the use of specially designed rotating brushes which clean all of the eggs’ surfaces. This allows for an exceptional level of cleanliness. First, the eggs are fed into the machine with the use of an integrated gravity feeder tray. There, thanks to the use of specially profiled rollers, the eggs are rotated along their axis, while specially designed
brushes wash the eggs at every angle, which results in a 3D washing effect. After washing, the eggs are transported into a drying section, where they are dried by a stream of warm air. The washer operates in a closed water circuit, which allows for its optimal use and reduces costs.
Available ways of transportation
|
|
|
|
|
* US and EU only
|
DESTINATION: Egg breaking facilities, bakeries, confectioneries, pasta making companies. |
|
CAPACITY: 39000 eggs/hour |
|
REPLACES: 85 people |
|
COMPATIBILITY: VEL-30, UVC-1, RZ-1, UDTJ-150 |
|
POWER SUPPLY: 40-50 kW 400 V 3/N/PE 50/60 Hz, 40-50 kW 230 V 3/N/PE 50/60 Hz |
|
COMPRESSED AIR: n/d |
|
WATER: from client’s installation |
|
DIMENSIONS: 5396x1758x1654 mm [212x69x65 in.] |
|
MINIMAL WORKSPACE: 8000×3600 mm [315×142 in.] |
|
WEIGHT: 1300 kg [2866 lbs] |
|
OPERATED BY: 5 persons |
| |
|
|
ADDITIONAL INFORMATION |
| During first start the washer uses 80 liters [21 gallons] of water. During operation in water saving mode the machine uses 90 liters [24 gallons] of water per 8 hours. Around 150-200 grams [0.33-0.44 lbs] of detergent should be put in the machine after filling with water and after every water change. The machine must operate in a room with mechanical ventilation. Operating temperature: 10-55 degrees Celsius [50-131 degrees Fahrenheit]. The use of a closed water circuit allows for optimal water economy and minimizes costs. All parts of our machines which come in contact with eggs are made out of stainless steel EN 1.4301 (AISI 304). | |
|
DOWNLOADS |
| DATASHEET |
DESCRIPTION
The MX-6 washes the eggs in a 3D fashion thanks to the use of specially designed rotating brushes which clean all of the eggs’ surfaces. This allows for an exceptional level of cleanliness. First, the eggs are fed into the machine with the use of an integrated gravity feeder tray. There, thanks to the use of specially profiled rollers, the eggs are rotated along their axis, while specially designed
brushes wash the eggs at every angle, which results in a 3D washing effect. After washing, the eggs are transported into a drying section, where they are dried by a stream of warm air. The washer operates in a closed water circuit, which allows for its optimal use and reduces costs.
Available ways of transportation
|
|
|
|
|
* US and EU only